A&A middle leg too wide for Crash skirt

I ended up shaving about 1/4" off the sides of this box but that was probably a mistake... The little bit is screwed on from the outside (left) and down to add a little support.

 That was the only way to get the leg to fit through the skirt.

 I added some extra wood floor boards to the sides at the top to make up for the room between the verticle A*A frame supports to the box.

Then I switched from the A&A frame to the Com8. I ended up shortening the entire box by taking it apart, shortening the long sides with the miter saw, and drilling new guide holes for the screws.